Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Model No.: AW60, AW100, AW1130, AW200, AW260
Brand: Amrta or OEM
Type: Cooling Only With Electric Heater/Cooling Only/Heat Pump
Cooling Method: Air-cooled
Unit Structure: Integral
Selected Voltage: 380V/50HZ
Noise Level: Low
Certification: CE
Condition: New
Colour: White
Compressor Brand: Copeland / Danfoss / Daikin / Panasonic
Refrigerant: R410A / R407c / R134A / R22
Evaporator: Plate / Tube And Tube
Application Fields: Light Commercial Building
Compressor Qty/Circult: 1/2
Casing(Optional): Heat Recovery
Power Supply: 440V, 230V, 380-415V, 50HZ/60HZ
Packaging: Standard Package for Export Transport
Productivity: 5000SETS/Year
Transportation: Ocean,Air
Place of Origin: China
Supply Ability: 400PCS / Month
HS Code: 8418612090
Port: Qingdao,Shandong,China
Payment Type: L/C,T/T,Western Union
Incoterm: FOB,CFR,CIF
The use of an industrial inhibited glycol and water mixture is recommended in most Water Chiller systems. Ethylene and Propylene are the two standard types of inhibited glycols commonly used. The main job of glycol is to prevent freezing of the process fluid and ensure consistent flow at the operating temperature. Inhibited glycols will also prevent formation of scale and corrosion while protecting metals such as brass, copper, steel, cast iron and aluminum. Water systems treated with an inhibited glycol will also be protected from algae and bacteria that can grow and degrade the fluid system performance.
Application areas
● Small Offices, Hotels, Hospitals
● Industry
● Administration
● Small commercial and residential buildings
Why this choice?
● Very high efficiency with R410A
● Very low noise operation
● R410A scroll compressors
● Advanced control
● Unit with pump and optional buffer tank
● Very compact for outdoor or indoor installation
Characteristics
01. Structure. Panels and base frame are made from alvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
02. Compressor. Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
03. Axial fan. External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
04. Evaporator. High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with antifreeze heating element (option) and differential
pressure switch, factory insulated with flexible close cell material.
05. Condenser. Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins,100% fully quality tested; sub
cooling circuit to prevent freezing at the base (optional); protected with metal grill.
06. Desuperheater. High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material(optional).
07. Refrigerant circuit. Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset . The Heat Pump System unit is completed also with 4-way valve, liquid receiver and one way valve.
08. Water circuit. Built with air vent valve, water drain connection, and female-threaded hydraulic connectors Water pump (8kW-30kW), differential pressure switch Expansion tank (8kW-30kW).
09. Electric panel
Compressor contactor
Compressor protection breaker
Fan motor protection breaker
Control circuit protection breaker
Phase sequence relay (only for 3-phase)
Programmable microprocessor controller
10. Optional
Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed.
Stainless steel covering
Remote condenser
Tube in tube heat exchanger
Water circuit electric heater
Air Cooled Scroll Water Chiller Technical Data
Model | Unit | AW20 | AW25 | AW30 | AW35 | AW40 | AW50 |
Cooling * | |||||||
Cooling capacity | kW | 21.5 | 24.8 | 30 | 35.6 | 41 | 50.6 |
Cooling input (without water pump) | kW | 8.2 | 9.03 | 9.39 | 13.2 | 15.02 | 18.8 |
EER | / | 2.62 | 2.75 | 3.19 | 2.7 | 2.73 | 2.69 |
Heating ** | |||||||
Heating capacity | kW | 26.3 | 29 | 34 | 41.8 | 47.2 | 60 |
Heating input (without water pump) | kW | 8.7 | 9.23 | 9.43 | 14.3 | 15.57 | 20.45 |
COP | / | 3.02 | 3.14 | 3.61 | 2.92 | 3.03 | 2.93 |
Hermetic compressor | |||||||
Type | / | ||||||
Quantity/ circuit | / | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 | 2/2 |
Evaporator | |||||||
Type | / | ||||||
Water flow | m3/h | 3.7 | 4.3 | 5.2 | 6.1 | 7.1 | 8.7 |
Water side pressure drop | kPa | 38 | 39 | 42 | 50 | 52 | 52 |
Water connection size | mm | DN40 | DN40 | DN40 | DN40 | DN40 | DN40 |
Circulating pump | |||||||
Power input | kW | 0.75 | 0.75 | 0.92 | --------- | --------- | ----------- |
Axial fans | |||||||
Quantity | Nr. | 1 | 1 | 1 | 2 | 2 | 2 |
Airflow | m3/h | 9000 | 9000 | 12580 | 17000 | 17000 | 22000 |
Overal dimension | |||||||
Length | mm | 1600 | 1600 | 1600 | 2000 | 2000 | 2000 |
Width | mm | 900 | 900 | 900 | 900 | 900 | 900 |
Height | mm | 1080 | 1080 | 1080 | 1080 | 1080 | 1080 |
Noise level *** | dB(A) | 66 | 66 | 68 | 70 | 70 | 70 |
Net weight | kg | 270 | 290 | 310 | 360 | 380 | 465 |
Product Categories : Water Chiller > Glycol Water Chiller
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.